diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index bba8901..609a22f 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -27,6 +27,8 @@
 
 COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
 COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o
+COBJS-$(CONFIG_PHYLIB) += phy.o
+COBJS-$(CONFIG_PHYLIB_10G) += generic_10g.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c
new file mode 100644
index 0000000..315c508
--- /dev/null
+++ b/drivers/net/phy/generic_10g.c
@@ -0,0 +1,105 @@
+/*
+ * Generic PHY Management code
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ * Based loosely off of Linux's PHY Lib
+ */
+
+#include <config.h>
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+
+int gen10g_shutdown(struct phy_device *phydev)
+{
+	return 0;
+}
+
+int gen10g_startup(struct phy_device *phydev)
+{
+	int devad, reg;
+	u32 mmd_mask = phydev->mmds;
+
+	phydev->link = 1;
+
+	/* For now just lie and say it's 10G all the time */
+	phydev->speed = SPEED_10000;
+	phydev->duplex = DUPLEX_FULL;
+
+	for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
+		if (!mmd_mask & 1)
+			continue;
+
+		/* Read twice because link state is latched and a
+		 * read moves the current state into the register */
+		phy_read(phydev, devad, MDIO_STAT1);
+		reg = phy_read(phydev, devad, MDIO_STAT1);
+		if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+			phydev->link = 0;
+	}
+
+	return 0;
+}
+
+int gen10g_discover_mmds(struct phy_device *phydev)
+{
+	int mmd, stat2, devs1, devs2;
+
+	/* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
+	 * XS or DTE XS; give up if none is present. */
+	for (mmd = 1; mmd <= 5; mmd++) {
+		/* Is this MMD present? */
+		stat2 = phy_read(phydev, mmd, MDIO_STAT2);
+		if (stat2 < 0 ||
+			(stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
+			continue;
+
+		/* It should tell us about all the other MMDs */
+		devs1 = phy_read(phydev, mmd, MDIO_DEVS1);
+		devs2 = phy_read(phydev, mmd, MDIO_DEVS2);
+		if (devs1 < 0 || devs2 < 0)
+			continue;
+
+		phydev->mmds = devs1 | (devs2 << 16);
+		return 0;
+	}
+
+	return 0;
+}
+
+int gen10g_config(struct phy_device *phydev)
+{
+	/* For now, assume 10000baseT. Fill in later */
+	phydev->supported = phydev->advertising = SUPPORTED_10000baseT_Full;
+
+	return gen10g_discover_mmds(phydev);
+}
+
+struct phy_driver gen10g_driver = {
+	.uid		= 0xffffffff,
+	.mask		= 0xffffffff,
+	.name		= "Generic 10G PHY",
+	.features	= 0,
+	.config		= gen10g_config,
+	.startup	= gen10g_startup,
+	.shutdown	= gen10g_shutdown,
+};
+
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
new file mode 100644
index 0000000..919011d
--- /dev/null
+++ b/drivers/net/phy/phy.c
@@ -0,0 +1,724 @@
+/*
+ * Generic PHY Management code
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ * Based loosely off of Linux's PHY Lib
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <command.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <errno.h>
+
+/* Generic PHY support and helper functions */
+
+/**
+ * genphy_config_advert - sanitize and advertise auto-negotation parameters
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MII_ADVERTISE with the appropriate values,
+ *   after sanitizing the values to make sure we only advertise
+ *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
+ *   hasn't changed, and > 0 if it has changed.
+ */
+int genphy_config_advert(struct phy_device *phydev)
+{
+	u32 advertise;
+	int oldadv, adv;
+	int err, changed = 0;
+
+	/* Only allow advertising what
+	 * this PHY supports */
+	phydev->advertising &= phydev->supported;
+	advertise = phydev->advertising;
+
+	/* Setup standard advertisement */
+	oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
+
+	if (adv < 0)
+		return adv;
+
+	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+		 ADVERTISE_PAUSE_ASYM);
+	if (advertise & ADVERTISED_10baseT_Half)
+		adv |= ADVERTISE_10HALF;
+	if (advertise & ADVERTISED_10baseT_Full)
+		adv |= ADVERTISE_10FULL;
+	if (advertise & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	if (advertise & ADVERTISED_Pause)
+		adv |= ADVERTISE_PAUSE_CAP;
+	if (advertise & ADVERTISED_Asym_Pause)
+		adv |= ADVERTISE_PAUSE_ASYM;
+
+	if (adv != oldadv) {
+		err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv);
+
+		if (err < 0)
+			return err;
+		changed = 1;
+	}
+
+	/* Configure gigabit if it's supported */
+	if (phydev->supported & (SUPPORTED_1000baseT_Half |
+				SUPPORTED_1000baseT_Full)) {
+		oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+
+		if (adv < 0)
+			return adv;
+
+		adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+		if (advertise & SUPPORTED_1000baseT_Half)
+			adv |= ADVERTISE_1000HALF;
+		if (advertise & SUPPORTED_1000baseT_Full)
+			adv |= ADVERTISE_1000FULL;
+
+		if (adv != oldadv) {
+			err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000,
+					adv);
+
+			if (err < 0)
+				return err;
+			changed = 1;
+		}
+	}
+
+	return changed;
+}
+
+
+/**
+ * genphy_setup_forced - configures/forces speed/duplex from @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Configures MII_BMCR to force speed/duplex
+ *   to the values in phydev. Assumes that the values are valid.
+ */
+int genphy_setup_forced(struct phy_device *phydev)
+{
+	int err;
+	int ctl = 0;
+
+	phydev->pause = phydev->asym_pause = 0;
+
+	if (SPEED_1000 == phydev->speed)
+		ctl |= BMCR_SPEED1000;
+	else if (SPEED_100 == phydev->speed)
+		ctl |= BMCR_SPEED100;
+
+	if (DUPLEX_FULL == phydev->duplex)
+		ctl |= BMCR_FULLDPLX;
+
+	err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl);
+
+	return err;
+}
+
+
+/**
+ * genphy_restart_aneg - Enable and Restart Autonegotiation
+ * @phydev: target phy_device struct
+ */
+int genphy_restart_aneg(struct phy_device *phydev)
+{
+	int ctl;
+
+	ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+	if (ctl < 0)
+		return ctl;
+
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+
+	/* Don't isolate the PHY if we're negotiating */
+	ctl &= ~(BMCR_ISOLATE);
+
+	ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl);
+
+	return ctl;
+}
+
+
+/**
+ * genphy_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ *   advertising, and then restart auto-negotiation.  If it is not
+ *   enabled, then we write the BMCR.
+ */
+int genphy_config_aneg(struct phy_device *phydev)
+{
+	int result;
+
+	if (AUTONEG_ENABLE != phydev->autoneg)
+		return genphy_setup_forced(phydev);
+
+	result = genphy_config_advert(phydev);
+
+	if (result < 0) /* error */
+		return result;
+
+	if (result == 0) {
+		/* Advertisment hasn't changed, but maybe aneg was never on to
+		 * begin with?  Or maybe phy was isolated? */
+		int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+		if (ctl < 0)
+			return ctl;
+
+		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+			result = 1; /* do restart aneg */
+	}
+
+	/* Only restart aneg if we are advertising something different
+	 * than we were before.	 */
+	if (result > 0)
+		result = genphy_restart_aneg(phydev);
+
+	return result;
+}
+
+/**
+ * genphy_update_link - update link status in @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Update the value in phydev->link to reflect the
+ *   current link value.  In order to do this, we need to read
+ *   the status register twice, keeping the second value.
+ */
+int genphy_update_link(struct phy_device *phydev)
+{
+	unsigned int mii_reg;
+
+	/*
+	 * Wait if the link is up, and autonegotiation is in progress
+	 * (ie - we're capable and it's not done)
+	 */
+	mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+	/*
+	 * If we already saw the link up, and it hasn't gone down, then
+	 * we don't need to wait for autoneg again
+	 */
+	if (phydev->link && mii_reg & BMSR_LSTATUS)
+		return 0;
+
+	if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
+		int i = 0;
+
+		printf("%s Waiting for PHY auto negotiation to complete",
+			phydev->dev->name);
+		while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
+			/*
+			 * Timeout reached ?
+			 */
+			if (i > PHY_ANEG_TIMEOUT) {
+				printf(" TIMEOUT !\n");
+				phydev->link = 0;
+				return 0;
+			}
+
+			if (ctrlc()) {
+				puts("user interrupt!\n");
+				phydev->link = 0;
+				return -EINTR;
+			}
+
+			if ((i++ % 500) == 0)
+				printf(".");
+
+			udelay(1000);	/* 1 ms */
+			mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+		}
+		printf(" done\n");
+		phydev->link = 1;
+	} else {
+		/* Read the link a second time to clear the latched state */
+		mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+		if (mii_reg & BMSR_LSTATUS)
+			phydev->link = 1;
+		else
+			phydev->link = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Generic function which updates the speed and duplex.  If
+ * autonegotiation is enabled, it uses the AND of the link
+ * partner's advertised capabilities and our advertised
+ * capabilities.  If autonegotiation is disabled, we use the
+ * appropriate bits in the control register.
+ *
+ * Stolen from Linux's mii.c and phy_device.c
+ */
+static int genphy_parse_link(struct phy_device *phydev)
+{
+	int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+	/* We're using autonegotiation */
+	if (mii_reg & BMSR_ANEGCAPABLE) {
+		u32 lpa = 0;
+		u32 gblpa = 0;
+
+		/* Check for gigabit capability */
+		if (mii_reg & BMSR_ERCAP) {
+			/* We want a list of states supported by
+			 * both PHYs in the link
+			 */
+			gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000);
+			gblpa &= phy_read(phydev,
+					MDIO_DEVAD_NONE, MII_CTRL1000) << 2;
+		}
+
+		/* Set the baseline so we only have to set them
+		 * if they're different
+		 */
+		phydev->speed = SPEED_10;
+		phydev->duplex = DUPLEX_HALF;
+
+		/* Check the gigabit fields */
+		if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+			phydev->speed = SPEED_1000;
+
+			if (gblpa & PHY_1000BTSR_1000FD)
+				phydev->duplex = DUPLEX_FULL;
+
+			/* We're done! */
+			return 0;
+		}
+
+		lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
+		lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA);
+
+		if (lpa & (LPA_100FULL | LPA_100HALF)) {
+			phydev->speed = SPEED_100;
+
+			if (lpa & LPA_100FULL)
+				phydev->duplex = DUPLEX_FULL;
+
+		} else if (lpa & LPA_10FULL)
+			phydev->duplex = DUPLEX_FULL;
+	} else {
+		u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+		phydev->speed = SPEED_10;
+		phydev->duplex = DUPLEX_HALF;
+
+		if (bmcr & BMCR_FULLDPLX)
+			phydev->duplex = DUPLEX_FULL;
+
+		if (bmcr & BMCR_SPEED1000)
+			phydev->speed = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			phydev->speed = SPEED_100;
+	}
+
+	return 0;
+}
+
+int genphy_config(struct phy_device *phydev)
+{
+	int val;
+	u32 features;
+
+	/* For now, I'll claim that the generic driver supports
+	 * all possible port types */
+	features = (SUPPORTED_TP | SUPPORTED_MII
+			| SUPPORTED_AUI | SUPPORTED_FIBRE |
+			SUPPORTED_BNC);
+
+	/* Do we support autonegotiation? */
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+	if (val < 0)
+		return val;
+
+	if (val & BMSR_ANEGCAPABLE)
+		features |= SUPPORTED_Autoneg;
+
+	if (val & BMSR_100FULL)
+		features |= SUPPORTED_100baseT_Full;
+	if (val & BMSR_100HALF)
+		features |= SUPPORTED_100baseT_Half;
+	if (val & BMSR_10FULL)
+		features |= SUPPORTED_10baseT_Full;
+	if (val & BMSR_10HALF)
+		features |= SUPPORTED_10baseT_Half;
+
+	if (val & BMSR_ESTATEN) {
+		val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS);
+
+		if (val < 0)
+			return val;
+
+		if (val & ESTATUS_1000_TFULL)
+			features |= SUPPORTED_1000baseT_Full;
+		if (val & ESTATUS_1000_THALF)
+			features |= SUPPORTED_1000baseT_Half;
+	}
+
+	phydev->supported = features;
+	phydev->advertising = features;
+
+	genphy_config_aneg(phydev);
+
+	return 0;
+}
+
+int genphy_startup(struct phy_device *phydev)
+{
+	genphy_update_link(phydev);
+	genphy_parse_link(phydev);
+
+	return 0;
+}
+
+int genphy_shutdown(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static struct phy_driver genphy_driver = {
+	.uid		= 0xffffffff,
+	.mask		= 0xffffffff,
+	.name		= "Generic PHY",
+	.features	= 0,
+	.config		= genphy_config,
+	.startup	= genphy_startup,
+	.shutdown	= genphy_shutdown,
+};
+
+static LIST_HEAD(phy_drivers);
+
+int phy_init(void)
+{
+	return 0;
+}
+
+int phy_register(struct phy_driver *drv)
+{
+	INIT_LIST_HEAD(&drv->list);
+	list_add_tail(&drv->list, &phy_drivers);
+
+	return 0;
+}
+
+int phy_probe(struct phy_device *phydev)
+{
+	int err = 0;
+
+	phydev->advertising = phydev->supported = phydev->drv->features;
+	phydev->mmds = phydev->drv->mmds;
+
+	if (phydev->drv->probe)
+		err = phydev->drv->probe(phydev);
+
+	return err;
+}
+
+static struct phy_driver *generic_for_interface(phy_interface_t interface)
+{
+#ifdef CONFIG_PHYLIB_10G
+	if (is_10g_interface(interface))
+		return &gen10g_driver;
+#endif
+
+	return &genphy_driver;
+}
+
+struct phy_driver *get_phy_driver(struct phy_device *phydev,
+				phy_interface_t interface)
+{
+	struct list_head *entry;
+	int phy_id = phydev->phy_id;
+	struct phy_driver *drv = NULL;
+
+	list_for_each(entry, &phy_drivers) {
+		drv = list_entry(entry, struct phy_driver, list);
+		if ((drv->uid & drv->mask) == (phy_id & drv->mask))
+			return drv;
+	}
+
+	/* If we made it here, there's no driver for this PHY */
+	return generic_for_interface(interface);
+}
+
+struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id,
+					phy_interface_t interface)
+{
+	struct phy_device *dev;
+
+	/* We allocate the device, and initialize the
+	 * default values */
+	dev = malloc(sizeof(*dev));
+	if (!dev) {
+		printf("Failed to allocate PHY device for %s:%d\n",
+			bus->name, addr);
+		return NULL;
+	}
+
+	memset(dev, 0, sizeof(*dev));
+
+	dev->duplex = -1;
+	dev->link = 1;
+	dev->interface = interface;
+
+	dev->autoneg = AUTONEG_ENABLE;
+
+	dev->addr = addr;
+	dev->phy_id = phy_id;
+	dev->bus = bus;
+
+	dev->drv = get_phy_driver(dev, interface);
+
+	phy_probe(dev);
+
+	bus->phymap[addr] = dev;
+
+	return dev;
+}
+
+/**
+ * get_phy_id - reads the specified addr for its ID.
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ *   @bus, stores it in @phy_id and returns zero on success.
+ */
+int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+{
+	int phy_reg;
+
+	/* Grab the bits from PHYIR1, and put them
+	 * in the upper half */
+	phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
+
+	if (phy_reg < 0)
+		return -EIO;
+
+	*phy_id = (phy_reg & 0xffff) << 16;
+
+	/* Grab the bits from PHYIR2, and put them in the lower half */
+	phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
+
+	if (phy_reg < 0)
+		return -EIO;
+
+	*phy_id |= (phy_reg & 0xffff);
+
+	return 0;
+}
+
+/**
+ * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ *   @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
+				phy_interface_t interface)
+{
+	u32 phy_id = 0x1fffffff;
+	int i;
+	int r;
+
+	/* If we have one, return the existing device, with new interface */
+	if (bus->phymap[addr]) {
+		bus->phymap[addr]->interface = interface;
+
+		return bus->phymap[addr];
+	}
+
+	/* Try Standard (ie Clause 22) access */
+	r = get_phy_id(bus, addr, MDIO_DEVAD_NONE, &phy_id);
+	if (r)
+		return NULL;
+
+	/* If the PHY ID is mostly f's, we didn't find anything */
+	if ((phy_id & 0x1fffffff) != 0x1fffffff)
+		return phy_device_create(bus, addr, phy_id, interface);
+
+	/* Otherwise we have to try Clause 45 */
+	for (i = 1; i < 5; i++) {
+		r = get_phy_id(bus, addr, i, &phy_id);
+		if (r)
+			return NULL;
+
+		/* If the phy_id is mostly Fs, there is no device there */
+		if ((phy_id & 0x1fffffff) != 0x1fffffff)
+			break;
+	}
+
+	return phy_device_create(bus, addr, phy_id, interface);
+}
+
+int phy_reset(struct phy_device *phydev)
+{
+	int reg;
+	int timeout = 500;
+	int devad = MDIO_DEVAD_NONE;
+
+#ifdef CONFIG_PHYLIB_10G
+	/* If it's 10G, we need to issue reset through one of the MMDs */
+	if (is_10g_interface(phydev->interface)) {
+		if (!phydev->mmds)
+			gen10g_discover_mmds(phydev);
+
+		devad = ffs(phydev->mmds) - 1;
+	}
+#endif
+
+	reg = phy_read(phydev, devad, MII_BMCR);
+	if (reg < 0) {
+		debug("PHY status read failed\n");
+		return -1;
+	}
+
+	reg |= BMCR_RESET;
+
+	if (phy_write(phydev, devad, MII_BMCR, reg) < 0) {
+		debug("PHY reset failed\n");
+		return -1;
+	}
+
+#ifdef CONFIG_PHY_RESET_DELAY
+	udelay(CONFIG_PHY_RESET_DELAY);	/* Intel LXT971A needs this */
+#endif
+	/*
+	 * Poll the control register for the reset bit to go to 0 (it is
+	 * auto-clearing).  This should happen within 0.5 seconds per the
+	 * IEEE spec.
+	 */
+	while ((reg & BMCR_RESET) && timeout--) {
+		reg = phy_read(phydev, devad, MII_BMCR);
+
+		if (reg < 0) {
+			debug("PHY status read failed\n");
+			return -1;
+		}
+		udelay(1000);
+	}
+
+	if (reg & BMCR_RESET) {
+		puts("PHY reset timed out\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int miiphy_reset(const char *devname, unsigned char addr)
+{
+	struct mii_dev *bus = miiphy_get_dev_by_name(devname);
+	struct phy_device *phydev;
+
+	/*
+	 * miiphy_reset was only used on standard PHYs, so we'll fake it here.
+	 * If later code tries to connect with the right interface, this will
+	 * be corrected by get_phy_device in phy_connect()
+	 */
+	phydev = get_phy_device(bus, addr, PHY_INTERFACE_MODE_MII);
+
+	return phy_reset(phydev);
+}
+
+struct phy_device *phy_connect(struct mii_dev *bus, int addr,
+				struct eth_device *dev,
+				phy_interface_t interface)
+{
+	struct phy_device *phydev;
+
+	/* Reset the bus */
+	bus->reset(bus);
+
+	/* Wait 15ms to make sure the PHY has come out of hard reset */
+	udelay(15000);
+
+	phydev = get_phy_device(bus, addr, interface);
+
+	if (!phydev) {
+		printf("Could not get PHY for %s:%d\n", bus->name, addr);
+
+		return NULL;
+	}
+
+	/* Soft Reset the PHY */
+	phy_reset(phydev);
+
+	if (phydev->dev)
+		printf("%s:%d is connected to %s.  Reconnecting to %s\n",
+			bus->name, addr, phydev->dev->name, dev->name);
+
+	phydev->dev = dev;
+
+	printf("%s connected to %s\n", dev->name, phydev->drv->name);
+
+	return phydev;
+}
+
+int phy_startup(struct phy_device *phydev)
+{
+	if (phydev->drv->startup)
+		phydev->drv->startup(phydev);
+
+	return 0;
+}
+
+static int __board_phy_config(struct phy_device *phydev)
+{
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+	__attribute__((weak, alias("__board_phy_config")));
+
+int phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	/* Invoke an optional board-specific helper */
+	board_phy_config(phydev);
+
+	return 0;
+}
+
+int phy_shutdown(struct phy_device *phydev)
+{
+	if (phydev->drv->shutdown)
+		phydev->drv->shutdown(phydev);
+
+	return 0;
+}